Though it’s a gas efficient car, even the Ford Focus can burn out a Water Pump and overheat as it nears the a hundred,000 mile mark. It is vital that you examine your engine’s elements earlier than beginning this repair. Just keep in mind that the Water Pump in every Ford Focus is mounted indirectly on the entrance of the engine block.

Ford Focus Water Pump Removal Instructions

1. Place excessive temperature automotive sealant on the brand new water pump and place the new gasket over this. Hold the gasket in place on the pump as you mount it on the engine, where you removed the old pump.
2. Maintain the water pump in place as you secure it with 4 new bolts. Tighten every in any order with 13 foot pounds torque. Reassemble the rest of the components within the order you took them off the Ford Focus. Exchange any parts that appear worn or broken as you go.
3. Replace the radiator’s drain plug and refill the radiator with the quantity and kind of coolant laid out in your proprietor’s manual. Transfer the jack stands and launch the jack. Connect the destructive battery cable to the post and tighten the screw on the clamp.
4. Crank the engine on the Ford Focus and verify for leaks. Then, shut the hood.